Water Heaters · Conroe, Texas

Water Heater Repair

No hot water or a heater that will not keep up? We check the gas or electric unit and explain whether a part repair or replacement makes sense.

I have no hot water, or my water heater is acting up

Book the visit. We'll find the cause, explain your options, and confirm the price before work starts.

A plumber working on a tank water heater
  • Responsible Master Plumber #45475
  • 237 completed jobs around Conroe

Book online

Book a local plumber right now!

Two short steps. No account needed.

Is water leaking or gushing?
Your request

How can we help?

What are you noticing?

Date and time

You’re booking a service call. A plumber comes out, finds the cause and talks you through the fix.

Contact information

Please provide the service address and your contact information.

Prefer to talk? Call (936) 758-6237

Price expectations

What drives the cost

The price depends on what the plumber finds. Here's what each outcome looks like and where it starts. You don't pick one: book the visit, and we confirm the scope and price with you before any work starts.

Best case

Ask us

A gas water heater whose pilot won't stay lit.

  • Replace the thermocouple to restore the pilot light and full function.

Exceptional

Ask us

A tank that's corroding inside, caught before it fails.

  • Replace the sacrificial anode rod to protect the tank from corrosion.

What can change the price

  • Age of the heater. On a younger heater, a part repair is usually the right call. On one near the end of its life, putting money into repairs can mean paying twice when the tank fails anyway.
  • Repeat visits. One worn part is normal. Several failing at once is often a sign the heater is wearing out, and that's worth knowing before you repair it.
  • Downtime. Most part repairs are done in one visit. The heater needs time to heat a full tank again afterward.

You don't need to pick one.

Tell us what's happening. You can leave the diagnosis to us; the visit is where we work out which fix you need.

Book a service callOr call (936) 758-6237

Is this what you’re dealing with?

A cold shower is a rough way to start the day. Water heaters work hard every day for years, and parts wear out. Most problems come down to one part, and a repair gets you hot water again without replacing the whole unit.

Read more about the causes and simple checks before you call.

Keep it from coming back:

In your area

Fix it or replace it? Depends on the house

In The Woodlands half the homes were built in 2000 or earlier, and in Shenandoah 2003 or earlier. If the tank is original to a house that age, a repair may just buy a little time, and we'll say so before you spend money on one.

In newer neighborhoods the math often flips: a younger tank with a bad element or thermostat is usually well worth fixing.

How it works

  1. Send the request

    Tell us what you're noticing. It takes a minute, and you don't need the technical terms.

  2. We confirm the time

    We call you back to confirm when we'll come.

  3. We find the cause, you decide

    A plumber finds the cause and shows you. You approve the price before any work starts.

The We The Plumbers van with the company name and license number

A local plumber you can check

Our work runs under Responsible Master Plumber license #45475, held by Dean Stewart, our trade authority. Our president, George Gallamore, is a Marine veteran and local entrepreneur. Our shop is on 910 Cable St in Conroe.

By our own job records, we've completed jobs in Panorama Village (85), Conroe (43), The Woodlands (31), Willis (31), and Spring (14).

Check it yourself first

Before you call, a couple of checks take two minutes and sometimes bring the hot water right back.

  1. On an electric heater, check the breaker panel for a tripped water heater breaker and reset it once.
  2. Make sure the thermostat dial on the heater hasn't been turned down.

Questions people ask

What usually causes it?

A pilot or ignition problem (gas): On a gas heater, a worn thermocouple or an ignition fault keeps the burner from staying lit. It's one of the most common reasons for no hot water. A tripped breaker or failed element (electric): On an electric heater, a tripped breaker or a burned-out heating element leaves you with lukewarm or cold water. A relief valve that drips or opens: The temperature and pressure relief valve is a safety part. If it drips or discharges, it's either worn or doing its job because the pressure is too high. We check which. A worn anode rod: The anode rod protects the tank from rust. Once it's used up, the water can smell or look rusty, and the tank starts to corrode.

How do you price it?

Repairs are priced per part replaced, so you pay for the fix you actually need. If we find the tank leaking or failing, replacement is priced separately, and we'll show you both before you decide.

Can I check it myself first?

Before you call, a couple of checks take two minutes and sometimes bring the hot water right back.

What happens when you come out?

Whether it's gas or electric, and whether the burner or elements are firing. The thermocouple, gas valve, or elements, and the breaker on electric units. The temperature and pressure relief valve, and the house water pressure. The tank for leaks and rust, and the heater's age from its label.

We're open Mon–Sat, 7am–6pm. After hours, stop the water first, then call or leave a message and we'll call you first thing.